Jump to content
Jezz

Prepar3D v3 – Совместимость с аддонами и заявления от разработчиков

Recommended Posts

Так он автоматом через централ заходит. Или я не так понимаю?

Он у меня при запуске сима сам обновляется :)

У многих под версией 3.1 крэшился сим из за него, поэтому и указал, что он обновился. :)

Share this post


Link to post
Share on other sites

Так он автоматом через централ заходит. Или я не так понимаю?

Через централ тоже обновляется.

Share this post


Link to post
Share on other sites

Новость одной строкой...

Состоялся релиз MigrationTool, теперь она "вышла" из бета-стадии и имеет нУмер билдf: 3.0.2.995

Бля...

Я извиняюсь, но это детский сад какой-то. Новая версия по прежнему записывает SimPaths из simobjects.cfg в Prepar3D.cfg. Нафига, спрашивается в задачнике? Те редкие проги, которые обращаются к этим записям, научились находить их в новом месте в первую неделю после релиза. Наличие "двойных" записей повергает их в шок. И бестолочи разрабы это знают - писал им, отвечали...

Edited by Enzzo

Share this post


Link to post
Share on other sites

Бля...

Я извиняюсь, но это детский сад какой-то. Новая версия по прежнему записывает SimPaths из simobjects.cfg в Prepar3D.cfg. Нафига, спрашивается в задачнике? Те редкие проги, которые обращаются к этим записям, научились находить их в новом месте в первую неделю после релиза. Наличие "двойных" записей повергает их в шок. И бестолочи разрабы это знают - писал им, отвечали...

Это можно же отключить самому в конфиге MigrationTool.cfg - строка RepairConfig= поменять с 1 на 0.

А так конечно им там уже не место :)

Share this post


Link to post
Share on other sites

Это можно же отключить самому в конфиге MigrationTool.cfg - строка RepairConfig= поменять с 1 на 0.

А так конечно им там уже не место :)

Да, я в курсе - именно этот "хинт" они мне и сообщили в ответном письме. И напрягает не это, а то, что херится сам смысл работы проги - прийти и уйти, не оставляя следов.

Share this post


Link to post
Share on other sites

Хотел спросить, если я куплю ASN в Стиме который продаётся, я потом смогу скачать версию для Препара? Или придётся отдельно покупать?

Share this post


Link to post
Share on other sites

Вроде не было такой информации о "QualityWings Ultimate 146 Collection" . Правда она не очень радостная. :( К сожалению текст на буржуйском.

Emil, QW Dev Team
 
I have personally not, but I would also never say never!
Now let me just echo our official company statement to you regarding P3Dv3 and the 146.
Before I do, consider this...
The Avro/146 package is a mature and stable product and has been for some time now.
Currently the very bulk of our time is being consumed by current on going development which you are all very familiar with, and of course our obligation to all of you and that is support.We don't do this full time. Infact, all us have full time careers and busy lives outside FS.
P3D at this time is extremely challenging to keep up with because of the frequency of the updates.
And they aren't minor revisions, they are completely new versions of the platform.
The end result is something we developed for a particular version of P3D, and amend as frequently as possible if need be, constantly gets broken with these "updates".
The reality is P3D is really an open beta / experimental sim. It is not a stable platform from the standpoint of its feature set and SDK.
It is actually a moving target, and for us at the development team... that is very, very challenging.
In all likelihood, but what I won't assume... the issue you are experiencing may very well be because of something that got messed up with P3Dv3.
But I'll quote you something, straight from our Q3 Company Status Update which will be of interest to you :

 

QuoteStatement on P3D V3.0

 

...We cannot comment at this time on the Ultimate 146 Collections on P3D V3.0 at this time. The same can be said for the Ultimate 757, but the only difference there is that if it requires ANY work from us, the Ultimate 757 WILL NOT see P3D V3.0 as again, that product is No Longer in Developer.

 
Thus I cannot comment further, but the moment we have anything to share about P3Dv3 and the Avro/146 product we won't hesitate to inform all of you. So for the time being, we can only ensure of compatibility up to 2.5.

 

Edited by DayWalker
  • Upvote 3

Share this post


Link to post
Share on other sites

Вроде не было такой информации о "QualityWings Ultimate 146 Collection" . Правда она не очень радостная. :( К сожалению текст на буржуйском.

Скрытое содержимое

 

Вот я и не слезаю окончательно с АЫЧа из-за 146-й.

Share this post


Link to post
Share on other sites

ASN SP4 зарелизили официально.

номер билда не изменился - 5848.

  • Upvote 2

Share this post


Link to post
Share on other sites

GSX обновился и поддерживает P3Dv3.4

 

  • Upvote 1

Share this post


Link to post
Share on other sites
3eb521b8-bddf-47ca-819a-9345f4168b41.jpg
 
REX SIMULATIONS and MILVIZ (Military Visualizations) has announced the release of Hotfix 1 for Service Pack 1 of the WX Advantage Radar.

Hotfix 1 includes these major updates and fixes:
  • Support for the latest version of Lockheed Martin's Prepar3D 3.4.18 (3.4.9, 3.4.14 are no longer supported)
  • Other general performance improvements.

 

P.S. Версия файла - wxrad_sp1_hotfix1_20170103

Edited by DayWalker

Share this post


Link to post
Share on other sites

Accu-Sim Update 01-17-17

5/9/2016 - 1/17/2017 CHANGES:

Accu-Sim Core:

- P-51: Fixed gear locks breaking when pulling the emergency hydraulic release and extending gear
(remember the updater will show the P-51 as already being updated because this change was made to the shared core Accu-Sim)

T-6
- Corrected nav fail when radio is off
- Fixed rudder trim animation
- Fixed rear exit clickspot
- 2D Controls: Rear canopy switch
- Fixed NAV/GPS switch initialization

Comanche:
- Fixed nosewheel steering when retracted
- Fixed error in Comanche drag
- HSI compatible with Mindstar GPS

Cessna 182:
- Fixed COM preprogrammed channels not saving properly.
- Fixed HSI rotating during tow even when battery is off

Cessna 172:
- Fixed COM preprogrammed channels not saving properly

Перейти на форум A2A

  • Upvote 2

Share this post


Link to post
Share on other sites

Здраствуйте! Я недавно перешел FSX на Prepar3d хотел узнать будет ли работать  MOSCOW DOMODEDOVO AIRPORT UUDD   препаре?

Share this post


Link to post
Share on other sites

FSUIPC 4.961 changes since 4.96

  1. The memory check facility (OOMcheck) is now performed in a thread separate to the main FS thread. Apparently before this is was causing a longer frame at redular intervals (10 seconds by default).
  2. This version supports Prepar3D version 3.4 with HotFix 3 applied (version 3.4.22.19868).
  • Upvote 2

Share this post


Link to post
Share on other sites

Небольшой фикс для AS2016 для препара...

Download link:
http://nimbus.hifitechinc.com/public...P3D_Update.exe

Hotfix 020617 (Experimental vis handling change #1)
- Experimental upper visibility depiction handling change with Volfog on (P3D), attempts to increase apparent visibility while still masking cloud draw distance using typical "masking" upper max visibility settings of approximately 80 miles

  • Upvote 3

Share this post


Link to post
Share on other sites

Всем огромный привет! Подскажите, где поправить нужно.. Днём нормально с тенями, а ночью мерцают.

Share this post


Link to post
Share on other sites

На всякий случай... Обновился GSX...

Перечень последний обновлений:

Update date: 10-Feb-2017 8:45 AM

  • Better Icing conditions detection when Dew Point > than OAT
  • Boarding/Deboarding time for Cargo planes is much faster due to only Crew Boarding/Deboarding the plane
  • New Ground Operator added: Finavia. Finnair is now demoted to Cargo-only operations at EFHK only (requires Vehicles Update download)
  • Bugfix: Some fields (Marshaller/Jetway) in the parking customization editor disappeared.

Feb 7th 2017

  • Straighten PushBack with towbar when finish left/right push.
  • All PMDG 747-400 variants supported.

Feb 6th 2017

  • Fixed a script error while De-icing.
  • PMDG 747-400F variant fixed.
  • Upvote 1

Share this post


Link to post
Share on other sites

STATUS UPDATE – MILVIZ/REX WX ADVANTAGE RADAR: IN DEBUG PHASE

2/11/2017 – A quick update on the next release of the WX Advantage Radar.  Key support will be for P3D 3.4.22.  We are testing a new install process and we are going to need a few extra days of testing.  The new installer will require users to uninstall all previous builds; however, users will not need to remove any of the Gauges configurations from your aircraft.

Share this post


Link to post
Share on other sites

наконец-то я перелез на новый ORBX Direct))) Скорость скачивания очень хорошая, не знаю кто там жаловался на нее

2017-02-12_12-29-30.png

  • Upvote 1

Share this post


Link to post
Share on other sites

Очередная бета...

Changelog for AS16 for P3D/FSX Hotfix 021517
- P3D Experimental upper visibility depiction handling change via previous HotFix made permanent
- Fixed issue where CPU usage would climb and app may eventually crash if Wake Turbulence Strength setting was set to zero (disabled)
(Experimental upper visibility depiction handling change with Volfog on (P3D), attempts to increase apparent visibility while still masking cloud draw distance using typical "masking" upper max visibility settings of approximately 80 miles)

Changelog for ASN for P3D/FSX Hotfix 021517
- Fixed CPU usage increase issue when Wake Turbulence Strength option was set to zero (disabled)
- Fixed issue where custom/manual weather would not export into current_wx_snapshot.txt file

Скачать

  • Upvote 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×