Jump to content
VATECH

X-Camera - аналог EzDock

Recommended Posts

блин, заплатил чуваку денег, и ни одного обновления не получил ни разу

Share this post


Link to post
Share on other sites

Ты ему не понравился чем то.

Share this post


Link to post
Share on other sites
Вышло обновление 2.0B7
I have decided to remove the camera classification that was introduced in 2.0B6 due to some feedback and discussion on X-Plane.org that the feature injected too much complication and the concept could generally be accomplished by adding more categories. If you had mapped commands to classification these commands mappings will no longer work.
Categories have been increased from ten to twenty.
A toggle walk mode command has been added that will allow you to map a joy stick to that command.
A mouse move feature has been added that dramatically improves the ability to move and place cameras. This feature works very similar to mouse look and can be used for X-Y, X-Z, and heading-pitch camera adjustments using the mouse and thee mapped commands. We also added an option to adjust the mouse smoothing factor for mouse look and move. This is a new option on the settings panel.
A forth movement range has been added, Very Large. This larger range is useful for placing free cameras of very large distances. It is highly likely that you will want to adjust your range settings when they are used with the mouse moving feature. The mouse can place the camera much faster than the keyboard so you may find it necessary to reduce the medium and large movement ranges in the settings panel.
Parameter driven Orbit and Fly-by animation generators have been added that will allow you to more easily create orbit and fly-by animations.
Transitions can be specified in seconds. When this option is used for the three transition types, X-Camera will calculate the required number of transition and the time of animation based on the simulators current frame rate.

Share this post


Link to post
Share on other sites

Привет, Андрей!

Угадай с трех раз, что ЭТО?

В кабину попасть не могу.

С уважением, Виктор.

post-1772-0-09263100-1425306598_thumb.jp

Share this post


Link to post
Share on other sites

Что это не знаю. Мало информации. Если отключить X-Camera, вид меняется? Загрузи Control Panel, начни регулировку с нуля - нажми клавиши Home и Center, если внешний вид External Camera и настраивай вид клавишами влево, вправо,  вниз и т. д. Покажи скрин здесь своей контрольной панели.

post-73-0-76943200-1425311560_thumb.jpg

Edited by Izumka

Share this post


Link to post
Share on other sites
Очередное обновление:
2.0B8
 
We have added a mini control panel that can be activated by a command mapping or optionally if you place your mouse in the bottom 5 pixels of the X-Plane window. The mini control panel will allow you to rapidly select categories and the first cameras in that category that will fit on the min panel.
We have also added an ability to browse community aircraft camera files which are located in the X-Camera/CommunityAircraftCameras directory. This allows you to import existing camera definitions for an aircraft or one from a similar aircraft so you can more rapidly setup a new plane.
We also added an Author and version field for the camera files so that if you choose to share your camera definitions with the X-Camera community people can see who created it and what version the file is at.
 

post-73-0-14650600-1426157938_thumb.jpg

Share this post


Link to post
Share on other sites

Вышла  финальная версия 2.0 

A System Check menu item has been added that will verify your X-Plane’s configuration is compatible with X-Camera. X-Camera must be enabled on an aircraft for the System Check to work.
We added an X-Camera command to toggle HeadShake on or off for the current camera.
We have added a mini control panel that can be activated by a command mapping or optionally if you place your mouse in the bottom 5 pixels of the X-Plane window. The mini control panel will allow you to rapidly select categories and the first cameras in that category that will fit on the min panel.
We have also added an ability to browse community aircraft camera files which are located in the X-Camera/CommunityAircraftCameras directory. This allows you to import existing camera definitions for an aircraft or one from a similar aircraft so you can more rapidly setup a new plane.
We also added an Author and version field for the camera files so that if you choose to share your camera definitions with the X-Camera community people can see who created it and what version the file is at.
Categories have been increased from ten to twenty.
A toggle walk mode command has been added that will allow you to map a joy stick to that command.
A mouse move feature has been added that dramatically improves the ability to move and place cameras. This feature works very similar to mouse look and can be used for X-Y, X-Z, and heading-pitch camera adjustments using the mouse and thee mapped commands. We also added an option to adjust the mouse smoothing factor for mouse look and move. This is a new option on the settings panel.
A forth movement range has been added, Very Large. This larger range is useful for placing free cameras of very large distances. It is highly likely that you will want to adjust your range settings when they are used with the mouse moving feature. The mouse can place the camera much faster than the keyboard so you may find it necessary to reduce the medium and large movement ranges in the settings panel.
Parameter driven Orbit and Fly-by animation generators have been added that will allow you to more easily create orbit and fly-by animations.
Transitions can be specified in seconds. When this option is used for the three transition types, X-Camera will calculate the required number of transition and the time of animation based on the simulators current frame rate.
You can post your aircraft camera files and download other user’s aircraft camera files by going to our community files page:

 

  • Upvote 1

Share this post


Link to post
Share on other sites

Я не пойму, где раздобыть версию 2.0? Везде лежит 1.1! Денег немножко кинул, но кроме КЛЮЧА ни чего мне на почту не приходило! Поделитесь версией 2.0 пожалуйста!

Share this post


Link to post
Share on other sites

Должен прислать ссылку на скачивание и ключ именно для 2.0.

Edited by Izumka

Share this post


Link to post
Share on other sites

Отправил им письмо с просьбой выслать.

Share this post


Link to post
Share on other sites

Почему то сам эту страницу не нашел https://gumroad.com/l/yLDy. Надо для получения 2.0 заново зарегится и получить ключик и ссылку на скачивание. 

Share this post


Link to post
Share on other sites

А можно как то смену видов назначить на кнопки клавиатуры? Или это возможно только для кнопок джойстика? Так кнопок на джое не останется))

Share this post


Link to post
Share on other sites

А можно как то смену видов назначить на кнопки клавиатуры? Или это возможно только для кнопок джойстика? Так кнопок на джое не останется))

Конечно можно.

Share this post


Link to post
Share on other sites

Было бы очень здорово, если бы Вы подсказали как это сделать))) Прям вот очень прошу! Читаю книгу и вижу фигу это называется! (Супостацкий правда не ахти у меня)

 

Дело было не в бабине!) 

 

А возможно перенести с колеса мышки повороты головы? Как по стандарту на правую кнопку мыши?

Edited by Erslav

Share this post


Link to post
Share on other sites

В меню, открываете Plugins - x-camera - control panel, настриваете вид, задаете View Id, сохраняете. Входите в Settings-Joystick&Equipment-Keys, нажимаете Add New Key Assignment. Появляется новая клавиша <NONE>, наверху ставите галку, входите в каталог, выбираете SRS\X-Camera, жмете Open. Когда клавиша <NONE> зеленая, нажимаете желаемую кнопку клавиатуры и в списке команд справа выбираете ID с номером, который вы задали в настройках вида. Закрываете меню, команда нужного вида настроена. Все.

post-73-0-07102400-1428692178_thumb.jpg

post-73-0-51739300-1428692195_thumb.jpg

  • Upvote 2

Share this post


Link to post
Share on other sites

Спасибо большое! Заработало!)

Share this post


Link to post
Share on other sites

Не за что. :)

Share this post


Link to post
Share on other sites

Вышла Х-камера 2.1 бета 3. Он содержит следующие дополнения:

  • Поддержка масштабирования внешние камеры с помощью колесика мыши
  • Поддержка масштабирования внешних камер с новой мышкой команда Zoom
  • Добавлена принципиально новая функция, цели и сопровождения цели камеры
  • Upvote 1

Share this post


Link to post
Share on other sites

X-Camera 2.2.1 Patch B is Available

X-Camera 2.2.1 Patch B corrects a problem in X-Camera that persisted in version 2.2.1 related to selecting X-Plane views from an X-Camera view. Prior to this fix it potentially could take more than one click to select an X-Plane view when an X-Camera view was active.

You can get the patch by downloading this zip archive: https://www.stickandrudderstudios.com/downloads/X-Camera_2.2.1B.zip

  1. Make a backup copy of your X-Camera directory, do not delete the X-Camera directory in your plugins directory so you will retain your license key, X-Camera.ini file, and any target or airport camera files that you create.
  2. Unzip the archive
  3. Copy the X-Camera directory from the archive into your plugins folder allowing it to overwrite any files in the original X-Camera directory
  4. Start X-Plane, enable X-Camera and verify that the control panel title bar indicates that your are running X-Camera 2.2.1 Patch B
  • Upvote 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×